[ 1285.419372] [PYM]:[P0][V0]PYM open node
[ 1285.419404] [V0] vio_vctx_bind_subdev done, ctx_index(0) refcount(1)
[ 1285.419409] [S0][V0] pym_bind_chain_group done
[ 1285.419421] [P0][S0] pym_alloc_cfg_id shadow index = 0
[ 1285.419426] [S0]pym_subdev_init: pym_mode 1
[ 1285.419447] [PYM]:[P0][V1]PYM open node
[ 1285.419455] [V1] vio_vctx_bind_subdev done, ctx_index(0) refcount(1)
[ 1285.419460] [S0][V1] pym_bind_chain_group done
[ 1285.419603] vio_group_task_start: vio_gw1
[ 1285.419609] [S0]pym_subdev_init: pym_mode 1
[ 1285.419835] [S0]pym_subdev_reqbufs :reqbuf number 6
[ 1285.419850] Stream0 path: G0->G1
[ 1285.420265] [S0]gdc_subdev_open cnt 1
[ 1285.427310] [CIM]:j5_cim_open open node
[ 1285.427328] [V0] vio_vctx_bind_subdev done, ctx_index(0) refcount(1)
[ 1285.427334] [S0][V0] cim_bind_chain_group done, ctx_index(0) refcount(1)
[ 1285.427356] Stream0 path: G0->G1=>G4
[ 1285.427429] sensor0 user_mutex init !
[ 1285.427433] camera_fop_open sensor0 success 92
[ 1285.427527] vps mipi_host0: pre_init_request cmd: initing
[ 1285.582314] vps mipi_host0: pre_init_result cmd: done wake
[ 1286.310002] ioctl sensor0 init 196
[ 1286.310048] camera_set_intrinsic_param port 0 done
[ 1286.310083] vps mipi_host0: init cmd: 0 real
[ 1286.310094] vps mipi_host0: init begin
[ 1286.310098] vps mipi_host0: 4 lane 1920x1080 30fps datatype 0x1e
[ 1286.310106] vps mipi_host0: mclk 24 ignore
[ 1286.310169] vps mipi_host0: ipiclk set 148500000 get 648000000
[ 1286.310175] vps mipi_host0: linelenth: 4400, framelenth: 1125, fps: 30, ipiclk: 648000000, rx_bit_clk: 4800000000
[ 1286.311232] vps mipi_host0: ipi config hsa: 4, hbp: 4, hsd: 18
[ 1286.311243] vps mipi_host0: ipi2 vc0 datatype 0x1e 48bit
[ 1286.311252] vps mipi_host0: ipi3 vc0 datatype 0x1e 48bit
[ 1286.311260] vps mipi_host0: ipi4 vc0 datatype 0x1e 48bit
[ 1286.311269] vps mipi_host0: config 4/4 ipi done
[ 1286.311274] vps mipi_host0: check phy stop state
[ 1286.311278] vps mipi_host0: init end
[ 1286.311358] vps mipi_dev0: init cmd: 0 real
[ 1286.311366] vps mipi_dev0: init begin
[ 1286.311372] vps mipi_dev0: ipiclk set 148500000 get 148500000
[ 1286.311408] vps mipi_dev0: config 1/0 ipi done
[ 1286.311414] vps mipi_dev0: dphy state 0x2aa3
[ 1286.312419] vps mipi_dev0: dphy state 0x3ffb
[ 1286.312423] vps mipi_dev0: init end
[ 1286.414065] [S0][V0]pym_subdev_start hw enable
[ 1286.414073] [S0][V0]pym_subdev_start leader 1
[ 1286.416856] pym_check_hw_state cnt 10
[ 1286.416866] [S0][V1]pym_subdev_start leader 1
[ 1286.417000] [S0]cim_subdev_start hw enable
[ 1286.417006] [S0]cim_subdev_start
[ 1286.417046] vps mipi_host0: pre_start_request cmd: starting
[ 1286.417317] vps mipi_host0: pre_start_result cmd: done wake
[ 1286.417328] ioctl sensor0 start 166
[ 1286.417363] vps mipi_host0: start cmd: 0 real
[ 1286.417370] vps mipi_host0: check hs reception
[ 1286.418377] vps mipi_host0: entry hs reception
[ 1286.418434] vps mipi_dev0: start cmd: 0 real
[ 1292.425594] camera_i2c_release client is NULL
[ 1292.425610] camera_fop_release sensor0 success 123
[ 1292.526272] cim_check_exit_state wait ipi0 fe 100ms timeout
[ 1292.526282] isp_input_callback_get_attach is fail !, ret = -1, pipeline_id = 0 !
[ 1292.526286] isp_input_callback_isp_pipeline_id_get_attach, fail! ret = -1, pipeline_id = 0
[ 1292.526290] cim_check_exit_state ipi0 irq status 4
[ 1292.526304] [S0]cim_subdev_stop hw disable
[ 1292.526307] [S0]cim_subdev_stop
[ 1292.526436] [S0] CIM close node, cnt 0
[ 1292.526588] gdc_force_stop: gdc is already free
[ 1292.526641] [S0]gdc_subdev_close cnt 0
[ 1292.527582] pym_check_stop_state cnt 10 pym->irq_status = 0
[ 1292.527592] [S0][V1]pym_subdev_stop
[ 1292.527596] pym_check_shot_state cnt 10
[ 1292.527614] frame_work_function cancel by gstop1
[ 1292.527641] vio_group_task_stop: vio_gw1
[ 1292.529039] [S0][V1]pym_subdev_close
[ 1292.529044] [S0][V1] PYM close node, cnt 1
[ 1292.546294] pym_check_exit_state cnt 9 pym->irq_status = 0
[ 1292.566270] pym_check_exit_state cnt 9 pym->irq_status = 0
[ 1292.566277] [S0][V0]pym_subdev_stop hw disable
[ 1292.566281] [S0][V0]pym_subdev_stop
[ 1292.566284] pym_check_shot_state cnt 10
[ 1292.566288] [S0][V0]pym_subdev_close
[ 1292.566453] [S0][V0] PYM close node, cnt 0

