[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.256 (hall@hall) (gcc version 6.5.0 (Linaro GCC 6.5-2018.12)) #6 SMP PREEMPT RT Sat May 13 00:32:27 CST 2023 [ 0.000000] Boot CPU: AArch64 Processor [410fd034] [ 0.000000] Machine model: Hobot J3 SOC MP DVB [ 0.000000] earlycon: hobot0 at MMIO 0x00000000a5000000 (options '') [ 0.000000] bootconsole [hobot0] enabled [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000040000000, size 512 MiB [ 0.000000] OF: reserved mem: initialized node ion_cma, compatible id shared-dma-pool [ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000 [ 0.000000] On node 0 totalpages: 523519 [ 0.000000] DMA zone: 8184 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 523519 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu s63584 r8192 d30624 u102400 [ 0.000000] pcpu-alloc: s63584 r8192 d30624 u102400 alloc=25*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 515335 [ 0.000000] Kernel command line: earlycon kgdboc=ttyS0 security=selinux selinux=1 enforcing=0 console=ttyS0,921600 raid=noautodetect hobotboot.reson=POWER_RESET rootfstype=ext4 ro rootwait root=/dev/mmcblk0p9 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Memory: 1224568K/2094076K available (9854K kernel code, 1462K rwdata, 3592K rodata, 1024K init, 10568K bss, 328836K reserved, 540672K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008000000 - 0xffffff80089a0000 ( 9856 KB) [ 0.000000] .rodata : 0xffffff80089a0000 - 0xffffff8008d30000 ( 3648 KB) [ 0.000000] .init : 0xffffff8008d30000 - 0xffffff8008e30000 ( 1024 KB) [ 0.000000] .data : 0xffffff8008e30000 - 0xffffff8008f9d808 ( 1463 KB) [ 0.000000] .bss : 0xffffff8008f9d808 - 0xffffff80099ef8a0 ( 10569 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00008000 - 0xffffffbf02000000 ( 31 MB actual) [ 0.000000] memory : 0xffffffc000200000 - 0xffffffc080000000 ( 2046 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 33774 entries in 132 pages [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU priority boosting: priority 1 delay 500 ms. [ 0.000000] No expedited grace period (rcu_normal_after_boot). [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000202] clocksource: hobot_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 3526361616960 ns [ 0.000585] Console: colour dummy device 80x25 [ 0.014863] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.014870] pid_max: default: 32768 minimum: 301 [ 0.014988] Security Framework initialized [ 0.014993] SELinux: Initializing. [ 0.015074] SELinux: Starting in permissive mode [ 0.015227] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.015240] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.031969] ASID allocator initialised with 65536 entries [ 0.047960] Hierarchical SRCU implementation. [ 0.088070] smp: Bringing up secondary CPUs ... [ 0.132354] Detected VIPT I-cache on CPU1 [ 0.132389] CPU1: Booted secondary processor [410fd034] [ 0.176430] Detected VIPT I-cache on CPU2 [ 0.176453] CPU2: Booted secondary processor [410fd034] [ 0.220532] Detected VIPT I-cache on CPU3 [ 0.220554] CPU3: Booted secondary processor [410fd034] [ 0.220653] smp: Brought up 1 node, 4 CPUs [ 0.220659] SMP: Total of 4 processors activated. [ 0.220665] CPU features: detected: 32-bit EL0 Support [ 0.220813] CPU: All CPU(s) started at EL1 [ 0.220835] alternatives: patching kernel code [ 0.221981] devtmpfs: initialized [ 0.249867] random: get_random_u32 called from bucket_table_alloc+0x140/0x2e0 with crng_init=0 [ 0.251637] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.251656] futex hash table entries: 1024 (order: 5, 131072 bytes) [ 0.265687] xor: automatically using best checksumming function 32regs [ 0.265838] pinctrl core: initialized pinctrl subsystem [ 0.267167] NET: Registered protocol family 16 [ 0.268832] vdso: 2 pages (1 code @ ffffff80089a6000, 1 data @ ffffff8008e34000) [ 0.268847] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.271966] DMA: preallocated 256 KiB pool for atomic allocations [ 0.272597] pstore: using zlib compression [ 0.272748] console [pstore-1] enabled [ 0.272994] pstore: Registered ramoops as persistent store backend [ 0.273001] ramoops: attached 0x140000@0x3a00000, ecc: 0/0 [ 0.284747] hobot_dma a1005000.dma: Hobot DMA Engine Driver Probed!! [ 0.315376] SCSI subsystem initialized [ 0.316212] media: Linux media interface: v0.10 [ 0.316275] Linux video capture interface: v2.00 [ 0.316379] pps_core: LinuxPPS API ver. 1 registered [ 0.316384] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.316414] PTP clock support registered [ 0.342588] Advanced Linux Sound Architecture Driver Initialized. [ 0.343524] usbcore: registered new interface driver usbfs [ 0.343609] usbcore: registered new interface driver hub [ 0.343684] usbcore: registered new device driver usb [ 0.344138] clocksource: Switched to clocksource arch_sys_counter [ 0.513733] NET: Registered protocol family 2 [ 0.513911] IP idents hash table entries: 32768 (order: 6, 262144 bytes) [ 0.515011] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.515416] TCP bind hash table entries: 16384 (order: 8, 1441792 bytes) [ 0.516714] TCP: Hash tables configured (established 16384 bind 16384) [ 0.516973] UDP hash table entries: 1024 (order: 5, 196608 bytes) [ 0.517201] UDP-Lite hash table entries: 1024 (order: 5, 196608 bytes) [ 0.517636] NET: Registered protocol family 1 [ 0.518129] RPC: Registered named UNIX socket transport module. [ 0.518135] RPC: Registered udp transport module. [ 0.518140] RPC: Registered tcp transport module. [ 0.518145] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.519485] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.523213] audit: initializing netlink subsys (disabled) [ 0.523352] audit: type=2000 audit(0.516:1): state=initialized audit_enabled=0 res=1 [ 0.524333] Initialise system trusted keyrings [ 0.524504] workingset: timestamp_bits=46 max_order=19 bucket_order=0 [ 0.547430] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.547836] exFAT: Version 1.2.9 [ 0.549523] NFS: Registering the id_resolver key type [ 0.550210] Key type id_resolver registered [ 0.550742] Key type id_legacy registered [ 0.551262] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.551280] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.551287] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.553551] SELinux: Registering netfilter hooks [ 0.558186] NET: Registered protocol family 38 [ 0.558202] async_tx: api initialized (async) [ 0.558211] Key type asymmetric registered [ 0.558740] Asymmetric key parser 'x509' registered [ 0.559669] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.559677] io scheduler noop registered [ 0.560092] io scheduler cfq registered (default) [ 0.560099] io scheduler mq-deadline registered [ 0.560105] io scheduler kyber registered [ 0.561953] pinctrl-single a6003170.pinctrl_voltag: 64 pins at pa ffffff8009bbd170 size 8 [ 0.562458] pinctrl-single a6004000.pinctrl: 128 pins at pa ffffff8009bd1000 size 512 [ 0.562938] pinctrl_cdev soc:pinctrl_cdev@0xA6004000: start probe [ 0.563190] pinctrl_cdev soc:pinctrl_cdev@0xA6004000: probe ok [ 0.563481] gpio-x3 a6003000.gpio: x3 gpio probe start!!! [ 0.563502] gpio-x3 a6003000.gpio: x3 gpio add gpiochip start!!! [ 0.563905] gpio-x3 a6003000.gpio: diable all gpio irq [ 0.569734] gpio-x3 a6003000.gpio: irqbase:57 [ 0.569742] gpio-x3 a6003000.gpio: x3 irq add start!!! [ 0.569791] irq: Cannot allocate irq_descs @ IRQ57, assuming pre-allocated [ 0.570180] gpio-x3 a6003000.gpio: x3 irq add ok!!! [ 0.570250] gpio-x3 a6003000.gpio: x3 irqchip ops add ok!!! [ 0.570255] gpio-x3 a6003000.gpio: x3 gpio probe ok!!! [ 0.571189] hobot-pwm: hobot-pwmchip0 registered [ 0.571672] hobot-pwm: hobot-pwmchip1 registered [ 0.572698] pwm_hobot_lite: hobot_lpwm_probe: hobot-l registered [ 0.573479] gpio-x3 a6003000.gpio: x3_gpio_request(345) [ 0.573507] pwm-gpio soc:pwm@0: 1 gpio pwms loaded [ 0.574900] diag dev [ver:1.1] init done [ 0.575942] hobot_ddr_monitor: LPDDR4 detected [ 0.576345] hobot_ddr_monitor: ddr monitor init finished. [ 0.577165] hobot_apb_timeout:set apb timeout tgt_cnt:5000000, timeout_ms:20, clk_hz=250000000 [ 0.577755] [vcam] init start [ 0.578137] vcam probe start [ 0.578717] vcam probe end successful [ 0.579181] [vcam] init end [ 0.579849] cr5_service a100b000.cr5_service: Allocate image reserved memory, paddr: 0x80000000, vaddr: 0xffffff8009c14000, size = 0x4000 [ 0.579894] cr5_service a100b000.cr5_service: Allocate reserved memory, paddr: 0x8000f000, vaddr: 0xffffff8009b9e000, size = 0x1000 [ 0.580384] cr5_service a100b000.cr5_service: cr5_service registered! [ 0.581410] hobot_fusa: hobot fusa fatal api start [ 0.581436] hobot_fusa: fusa fatal pwm args: [ 0.581436] period:20000000 polarity:0 [ 0.582050] hobot_fusa: 1111period:20000000 duty:10000000 [ 0.582741] hobot_fusa: fusa fatal info: [ 0.582741] period:20000000 duty_cycle:10000000 enabled:1 [ 0.582751] pwm_gpio: It's the first time that PWM is pulled up [ 0.582753] pwm_gpio: PWM>25ms: 555ms [ 0.584251] fusa_fatal soc:fusa_fatal: Suc V0.1 [ 0.585529] a5000000.serial: ttyS0 at MMIO 0xa5000000 (irq = 10, base_baud = 12000000) is a hobot-uart [ 0.585580] console [ttyS0] enabled [ 0.585586] bootconsole [hobot0] disabled [ 0.586444] KGDB: Registered I/O driver kgdboc [ 0.586760] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 0.592744] pwm_gpio: It's the first time that PWM is pulled down [ 0.602646] brd: module loaded [ 0.618995] loop: module loaded [ 0.622035] hobot_spi a5006000.spi: registered master spi2 [ 0.622133] spi spi2.0: setup mode 0, 8 bits/w, 5000000 Hz max --> 0 [ 0.622423] hobot_spi a5006000.spi: registered child spi2.0 [ 0.622437] hobot_spi a5006000.spi: ver: HOBOT-spi_V20.200330 master [ 0.622969] libphy: Fixed MDIO Bus: probed [ 0.623920] CAN device driver interface [ 0.624117] mcp251x spi2.0: setup mode 0, 8 bits/w, 5000000 Hz max --> 0 [ 0.634392] mcp251x spi2.0: CANCTRL 0x87 [ 0.635145] mcp251x spi2.0 can0: MCP2515 successfully initialized. [ 0.635725] st_gmac a5014000.ethernet: found phy-handle subnode [ 0.635839] st_gmac a5014000.ethernet: xj3_mtl_setup, plat->rx-queues-to-use:4, and tx:4 [ 0.636020] st_gmac a5014000.ethernet: xj3_probe_config_dt, clk_ptp_rate:250000000 [ 0.636074] set mac address 00:11:22:d0:f4:a1: [ 0.636078] (using random mac adress) [ 0.637194] (NULL device *): xj3_get_hw_features, tx_fifo_size:16384 [ 0.637200] (NULL device *): xj3_get_hw_features, rx_fifo_size:16384 [ 0.637206] st_gmac a5014000.ethernet: TSO supported [ 0.637212] st_gmac a5014000.ethernet: TSO feature enabled [ 0.637219] st_gmac a5014000.ethernet: Enable Rx Mitigation via HW Watchdog Timer [ 0.637409] gpio-x3 a6003000.gpio: x3_gpio_request(345) [ 0.657426] libphy: hobot-mac-mdio: probed [ 0.659670] st_gmac a5014000.ethernet: hobot_eth_probe: probe sucessfully [ 0.660394] dwc3-of-simple b2000000.usb: b2000000.usb supply usb_0v8 not found, using dummy regulator [ 0.661701] dwc3-of-simple b2000000.usb: usb regulator 0v8 enable succeed [ 0.661713] dwc3-of-simple b2000000.usb: b2000000.usb supply usb_3v3 not found, using dummy regulator [ 0.662993] dwc3-of-simple b2000000.usb: usb regulator 3v3 enable succeed [ 0.663911] dwc3 b2000000.dwc3: Configuration mismatch. user dr_mode(otg) not equal with hardware default mode(peripheral). still use otg mode [ 0.663937] dwc3 b2000000.dwc3: found 6 IN and 3 OUT endpoints [ 0.665451] usbcore: registered new interface driver uas [ 0.665556] usbcore: registered new interface driver usb-storage [ 0.676638] hobot-rtc a6002000.rtc: rtc core: registered hobot-rtc as rtc0 [ 0.676861] i2c /dev entries driver [ 0.677153] hobot-i2c a5009000.i2c: hobot i2c probe start [ 0.677286] hobot-i2c a5009000.i2c: round_rate:96000000 [ 0.677300] hobot-i2c a5009000.i2c: I2C bus speed is 400000 [ 0.677306] hobot-i2c a5009000.i2c: clkdiv = 0x1d [ 0.677312] hobot-i2c a5009000.i2c: i2c0 diag register.... [ 0.678774] mpq7920 0-0069: start probe [ 0.685801] pf5024 0-0008: start probe [ 0.689000] hobot-i2c a5009000.i2c: hobot_i2c_0 probe done [ 0.689205] hobot-i2c a500a000.i2c: hobot i2c probe start [ 0.689310] hobot-i2c a500a000.i2c: round_rate:96000000 [ 0.689324] hobot-i2c a500a000.i2c: I2C bus speed is 400000 [ 0.689330] hobot-i2c a500a000.i2c: clkdiv = 0x1d [ 0.689336] hobot-i2c a500a000.i2c: i2c1 diag register.... [ 0.690631] hobot-i2c a500a000.i2c: hobot_i2c_1 probe done [ 0.690802] hobot-i2c a5016000.i2c: hobot i2c probe start [ 0.690892] hobot-i2c a5016000.i2c: round_rate:96000000 [ 0.690905] hobot-i2c a5016000.i2c: I2C bus speed is 400000 [ 0.690911] hobot-i2c a5016000.i2c: clkdiv = 0x1d [ 0.690916] hobot-i2c a5016000.i2c: i2c4 diag register.... [ 0.692432] hobot-i2c a5016000.i2c: hobot_i2c_4 probe done [ 0.692609] hobot-i2c a5017000.i2c: hobot i2c probe start [ 0.692704] hobot-i2c a5017000.i2c: round_rate:96000000 [ 0.692717] hobot-i2c a5017000.i2c: I2C bus speed is 400000 [ 0.692723] hobot-i2c a5017000.i2c: clkdiv = 0x1d [ 0.692729] hobot-i2c a5017000.i2c: i2c5 diag register.... [ 0.694028] hobot-i2c a5017000.i2c: hobot_i2c_5 probe done [ 0.694780] sif_mclk clock frequence is 544000000 [ 0.694819] mipi_rx0_ipi clock frequence is 544000000 [ 0.694865] mipi_rx1_ipi clock frequence is 544000000 [ 0.694928] mipi_rx2_ipi clock frequence is 544000000 [ 0.694995] mipi_rx3_ipi clock frequence is 544000000 [ 0.695073] mipi_tx_ipi clock frequence is 544000000 [ 0.695160] mipi_cfg_host clock frequence is 102000000 [ 0.695259] pym_mclk clock frequence is 1188000000 [ 0.695370] mipi_dev_ref clock frequence is 24000000 [ 0.695492] mipi_host_ref clock frequence is 24000000 [ 0.695625] sensor0_mclk clock frequence is 37125000 [ 0.695771] sensor1_mclk clock frequence is 37125000 [ 0.695926] sensor2_mclk clock frequence is 37125000 [ 0.696092] sensor3_mclk clock frequence is 37125000 [ 0.696097] [FRT:D] x3_ips_probe(0) [ 0.697387] hobot swinfo sel reg ro=0x1 boot dump [ 0.698123] pvt a1009000.pvt: SCRATCH test: 1234abcd, pvt is alive. [ 0.698376] pvt a1009000.pvt: VM Calibrated data detected [ 0.699416] hobot_wdt a1002000.watchdog: watchdog setting [pet:6s bark:11s bite:15s] [ 0.700101] hobot_wdt a1002000.watchdog: Hobot Watchdog Timer at ffffff800e92b000 with timeout 15s [ 0.701152] device-mapper: uevent: version 1.0.3 [ 0.701799] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 0.701901] device-mapper: verity-avb: AVB error handler initialized with vbmeta device: [ 0.706509] Synopsys Designware Multimedia Card Interface Driver [ 0.707152] dwmmc_hobot a5010000.dwmmc: ver: HOBOT-mmc_V20.200402 [ 0.707225] dwmmc_hobot a5010000.dwmmc: card-detect-delay not found. [ 0.707233] dwmmc_hobot a5010000.dwmmc: data-addr not found. [ 0.707851] mmc_host mmc0: card is non-removable. [ 0.747704] dwmmc_hobot a5011000.dwmmc: ver: HOBOT-mmc_V20.200402 [ 0.747778] dwmmc_hobot a5011000.dwmmc: card-detect-delay not found. [ 0.747785] dwmmc_hobot a5011000.dwmmc: data-addr not found. [ 0.747833] gpio-x3 a6003000.gpio: x3_gpio_request(345) [ 0.751880] gpio-x3 a6003000.gpio: x3_gpio_request(345) [ 0.752601] gpio-x3 a6003000.gpio: x3_gpio_request(345) [ 0.752613] dwmmc_hobot a5011000.dwmmc: Got CD GPIO [ 0.844241] gpio-x3 a6003000.gpio: start to bind gpio_irq(64) [ 0.844250] gpio-x3 a6003000.gpio: gpio(64) irq bind to bank(0) ok [ 0.844260] gpio-x3 a6003000.gpio: x3_gpio_irq_enable: gpio(64) [ 0.844932] usbcore: registered new interface driver usbhid [ 0.844937] usbhid: USB HID core driver [ 0.845135] logger: created 256K log 'log_main' [ 0.845320] logger: created 256K log 'log_events' [ 0.845485] logger: created 256K log 'log_radio' [ 0.845637] logger: created 256K log 'log_system' [ 0.845843] gpio-x3 a6003000.gpio: x3_gpio_request(345) [ 0.846112] gpio-x3 a6003000.gpio: start to bind gpio_irq(65) [ 0.846120] gpio-x3 a6003000.gpio: gpio(65) irq bind to bank(1) ok [ 0.846131] gpio-x3 a6003000.gpio: x3_gpio_irq_enable: gpio(65) [ 0.846985] usbcore: registered new interface driver snd-usb-audio [ 0.847891] Netfilter messages via NETLINK v0.30. [ 0.847942] ip_set: protocol 6 [ 0.848061] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 0.848883] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.849314] arp_tables: arp_tables: (C) 2002 David S. Miller [ 0.849484] Initializing XFRM netlink socket [ 0.850934] NET: Registered protocol family 10 [ 0.852614] Segment Routing with IPv6 [ 0.852683] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.853466] NET: Registered protocol family 17 [ 0.853489] can: controller area network core (rev 20170425 abi 9) [ 0.853779] NET: Registered protocol family 29 [ 0.853800] can: raw protocol (rev 20170425) [ 0.853809] can: broadcast manager protocol (rev 20170425 t) [ 0.853826] can: netlink gateway (rev 20170425) max_hops=1 [ 0.854105] 8021q: 802.1Q VLAN Support v1.8 [ 0.854172] Key type dns_resolver registered [ 0.854735] Found lo, alias (null) on irq 0 [ 0.854741] MAC: 00:00:00:00:00:00 [ 0.854746] Tx queue length: 1000 [ 0.854751] Invalid capabilities for NIC (lo), dropping from TSN list [ 0.854756] Found can0, alias (null) on irq 0 [ 0.854760] MAC: 00:00:00:00:00:00 [ 0.854764] Tx queue length: 10 [ 0.854768] Invalid capabilities for NIC (can0), dropping from TSN list [ 0.854773] Found eth0, alias (null) on irq 43 [ 0.854777] MAC: 00:11:22:d0:f4:a1 [ 0.854781] Tx queue length: 1000 [ 0.854786] _tsn_capable_nic: ndo_tsn_capable() present, got Not capable [ 0.854790] Invalid capabilities for NIC (eth0), dropping from TSN list [ 0.854795] Found tunl0, alias (null) on irq 0 [ 0.854799] MAC: 00:00:00:00:00:00 [ 0.854803] Tx queue length: 1000 [ 0.854807] Invalid capabilities for NIC (tunl0), dropping from TSN list [ 0.854812] Found sit0, alias (null) on irq 0 [ 0.854815] MAC: 00:00:00:00:00:00 [ 0.854820] Tx queue length: 1000 [ 0.854824] Invalid capabilities for NIC (sit0), dropping from TSN list [ 0.854828] tsn_init_module: No capable NIC found. Perhaps load with in_debug=1 ? [ 0.858675] Loading compiled-in X.509 certificates [ 0.879696] dwc3 b2000000.dwc3: Configuration mismatch. user dr_mode(otg) not equal with hardware default mode(peripheral). still use otg mode [ 0.879725] dwc3 b2000000.dwc3: found 6 IN and 3 OUT endpoints [ 0.884870] console [netcon0] enabled [ 0.884876] netconsole: network logging started [ 0.885251] hobot-rtc a6002000.rtc: setting system clock to 1970-01-01 00:00:00 UTC (0) [ 0.885662] vps mipi_dphy: probe with x3vio done [ 0.886167] hobot_wdt_test: wdt_test_init: wdt test init [ 0.888853] VCC_CNN1: disabling [ 0.889282] VCC_CNN0: disabling [ 0.890940] vps mipi_host0: ver 140* port0(0:0) [ 0.893259] vps mipi_host1: ver 140* port1(1:0) [ 0.894019] vps mipi_host2: ver 140* port2(0:1) [ 0.894735] vps mipi_host3: ver 140* port3(1:1) [ 0.895696] vps mipi_dev0: ver 120* port0 [ 0.896246] ALSA device list: [ 0.896251] No soundcards found. [ 0.896897] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) [ 0.897202] Waiting for root device /dev/mmcblk0p9... [ 0.930811] mmc0: new HS200 MMC card at address 0001 [ 0.931447] mmcblk0: mmc0:0001 H8G4a2 7.28 GiB [ 0.931650] mmcblk0boot0: mmc0:0001 H8G4a2 partition 1 8.00 MiB [ 0.931846] mmcblk0boot1: mmc0:0001 H8G4a2 partition 2 8.00 MiB [ 0.932060] mmcblk0rpmb: mmc0:0001 H8G4a2 partition 3 4.00 MiB, chardev (511:0) [ 0.934560] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 0.948977] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: (null) [ 0.949040] VFS: Mounted root (ext4 filesystem) readonly on device 179:9. [ 0.949440] devtmpfs: mounted [ 0.951358] Freeing unused kernel memory: 1024K [ 0.988673] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 0.988706] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 0.989577] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe6d hci version 0x110 quirks 0x0000000000010010 [ 0.989792] xhci-hcd xhci-hcd.0.auto: irq 178, io mem 0xb2000000 [ 0.991344] hub 1-0:1.0: USB hub found [ 0.991390] hub 1-0:1.0: 1 port detected [ 0.991965] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 0.991984] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 0.992000] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 0.992110] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.993375] hub 2-0:1.0: USB hub found [ 0.993418] hub 2-0:1.0: 1 port detected [ 1.009588] (none):unkown: init started! [ 1.010117] (none):unkown: SElinux init [ 1.036204] (none):unkown: Load SELinux Policy Fail [ 1.049069] (none):unkown: init second stage started! [ 1.049942] (none):unkown: SElinux init [ 1.050744] (none):unkown: Created socket '/dev/socket/property_service' with mode '666', user '0', group '0' [ 1.050772] (none):unkown: Parsing /init.rc... [ 1.054049] (none):unkown: (Parsing /init.rc took 0.00s.) [ 1.054794] (none):unkown: processing action 0x21c076a0 (console_init) [ 1.055380] (none):unkown: Command 'console_init' action=console_init returned 0 took 0.00s [ 1.055412] (none):unkown: processing action 0x21c0fca0 (init) [ 1.055435] (none):unkown: Command 'trigger boot' action=init (/init.rc:235) returned 0 took 0.00s [ 1.055450] (none):unkown: processing action 0x21c0fe60 (late-init) [ 1.401404] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.401645] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.401809] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.401850] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.401893] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.401930] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.401974] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.401987] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402000] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402015] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402028] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402060] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402073] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402101] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402114] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402141] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402154] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402221] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402235] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402262] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402277] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402304] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402317] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402344] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402357] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402387] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402400] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402416] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402429] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402441] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402469] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402482] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402513] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402525] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402541] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402553] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402566] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402594] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402608] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402620] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402637] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402650] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402677] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402690] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402718] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402731] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402758] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402772] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402788] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402803] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402816] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402842] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402855] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402868] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402881] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402894] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402907] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402920] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402933] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402946] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402961] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402974] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402986] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.402999] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403012] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403025] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403037] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403050] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403063] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403076] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403091] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403103] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403116] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403129] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403142] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403157] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403174] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403187] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403212] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403225] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403241] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403254] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403278] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403291] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403305] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403318] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403331] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403350] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403363] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403376] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403389] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403402] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403415] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403432] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403445] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403458] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403472] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403485] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403498] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403525] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403538] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403564] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403577] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403590] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403610] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403623] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403651] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403664] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403694] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403707] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403735] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403748] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403764] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403777] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403790] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403813] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403826] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403860] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403873] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403903] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403916] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403946] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403959] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403984] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.403997] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.404069] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.404082] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.404108] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.404122] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.404153] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.404167] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.404193] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.404207] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.404243] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.404444] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.404484] gpio-x3 a6003000.gpio: x3_gpio_generic_handler: irq(40), hwirq(86) [ 1.582475] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: (null) [ 1.587324] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: (null) [ 1.632859] EXT4-fs (mmcblk0p11): re-mounted. Opts: (null) [ 1.637024] EXT4-fs (mmcblk0p11): re-mounted. Opts: (null) [ 1.677662] udevd[1358]: starting version 3.2.5 [ 1.682472] random: udevd: uninitialized urandom read (16 bytes read) [ 1.683794] random: udevd: uninitialized urandom read (16 bytes read) [ 1.685225] random: udevd: uninitialized urandom read (16 bytes read) [ 1.703306] udevd[1372]: starting eudev-3.2.5 [ 1.780832] bpu_cores: module license 'Proprietary' taints kernel. [ 1.781650] Disabling lock debugging due to kernel taint [ 1.801009] hobot_efuse probe success [ 1.822027] hb_vpu a8000000.vpu: vpu_aclk clock is 750000000 [ 1.822252] hb_vpu a8000000.vpu: vpu_bclk clock is 544000000 [ 1.822289] hb_vpu a8000000.vpu: vpu_cclk clock is 544000000 [ 1.836537] hb_jpu a8010000.jpu: jpg_aclk clock is 750000000 [ 1.836682] hb_jpu a8010000.jpu: jpg_cclk clock is 544000000 [ 1.850809] [FRT:D] x3_sif_probe(0) [ 1.898985] acamera_loglist_init [ 1.920508] xhci-hcd xhci-hcd.0.auto: remove, state 4 [ 1.920972] usb usb2: USB disconnect, device number 1 [ 1.922980] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 1.923008] xhci-hcd xhci-hcd.0.auto: remove, state 4 [ 1.923026] usb usb1: USB disconnect, device number 1 [ 1.926857] [isp_drv]: camera_subdev_probe: register v4l2 lens device. result0 [ 1.934834] sensor_ctrl register success ! [ 1.940465] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered [ 2.049075] dwc3 b2000000.dwc3: initializing [ep0out] epnum(0) phy_epnum(0), offset(0xc800) [ 2.049297] dwc3 b2000000.dwc3: initializing [ep1out] epnum(2) phy_epnum(2), offset(0xc820) [ 2.049740] dwc3 b2000000.dwc3: initializing [ep2out] epnum(4) phy_epnum(3), offset(0xc830) [ 2.050406] dwc3 b2000000.dwc3: initializing [ep0in] epnum(1) phy_epnum(1), offset(0xc810) [ 2.050602] dwc3 b2000000.dwc3: initializing [ep1in] epnum(3) phy_epnum(4), offset(0xc840) [ 2.051085] dwc3 b2000000.dwc3: initializing [ep2in] epnum(5) phy_epnum(5), offset(0xc850) [ 2.051404] dwc3 b2000000.dwc3: initializing [ep3in] epnum(7) phy_epnum(6), offset(0xc860) [ 2.051866] dwc3 b2000000.dwc3: initializing [ep4in] epnum(9) phy_epnum(7), offset(0xc870) [ 2.052309] dwc3 b2000000.dwc3: initializing [ep5in] epnum(11) phy_epnum(8), offset(0xc880) [ 2.061067] [isp_drv]: acamera_camera_async_complete: complete done, rc: 0. [ 2.080962] Hobot fb probe!!! [ 2.080975] IAR dev not inited! [ 2.080981] hbfb_probe: error get fb paddr!! [ 2.081981] hobot-fb: probe of soc:fb failed with error -1 [ 2.098275] IAR dev not inited! [ 2.098284] IAR dev not inited! [ 2.112843] hdmi: add sii902xA driver [ 2.153182] hobot_dev_ipu: [FRT:D] x3_ipu_probe(0) [ 2.185181] hobot_dev_pym: [FRT:D] x3_pym_probe(0) [ 2.194164] [FRT:D] x3_gdc_probe(0) [ 2.195371] [FRT:D] x3_gdc_probe(0) [ 2.675426] using random self ethernet address [ 2.676021] using random host ethernet address [ 2.692040] usb0: HOST MAC 66:61:1f:7e:fb:7b [ 2.692108] usb0: MAC 2e:35:e2:6b:21:f2 [ 2.692246] using random self ethernet address [ 2.692836] using random host ethernet address [ 2.693482] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008 [ 2.693488] g_ether gadget: g_ether ready [ 2.772339] KGDB: Unregistered I/O driver kgdboc, debugger disabled [ 2.772358] KGDB: Registered I/O driver kgdboc [ 2.940178] Generic PHY hobot-mac-mdio-a5014000:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=hobot-mac-mdio-a5014000:00, irq=POLL) [ 2.959548] st_gmac a5014000.ethernet: RX IPC checksum offload disabled [ 2.959568] st_gmac a5014000.ethernet: IEEE 1588-2008 Advanced Timestamp [ 2.959574] st_gmac a5014000.ethernet: supported by Hobot Ethernet Network Card [ 2.961062] st_gmac a5014000.ethernet: registered PTP clock by hobot successfully [ 2.961140] st_gmac a5014000.ethernet: xj3_open: successfully [ 2.961394] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3.263432] file system registered [ 3.313034] read descriptors [ 3.313049] read strings [ 22.409259] st_gmac a5014000.ethernet: Link is Up - 1000/Full [ 22.409310] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 23.425212] st_gmac a5014000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 1809.032923] gpio-x3 a6003000.gpio: x3_gpio_request(345) [ 2774.054735] gpio-x3 a6003000.gpio: x3_gpio_request(345) [ 3286.685594] gpio-x3 a6003000.gpio: x3_gpio_request(345)