[2023-07-18 15:36:10,070] [Update0] [INFO] xmodem.py:61 xmodem transmit use CRC
[2023-07-18 15:36:15,079] [Update0] [INFO] xmodem.py:240 loaded 34%, remaining time is 0m 9s
[2023-07-18 15:36:20,086] [Update0] [INFO] xmodem.py:240 loaded 69%, remaining time is 0m 4s
[2023-07-18 15:36:24,471] [Update0] [INFO] uart_boot.py:167 load success
[2023-07-18 15:36:24,471] [Update0] [INFO] uart_boot.py:143 wait string before send data/board_config/j5/boot_config/boot_file/uboot-env.bin.
[2023-07-18 15:36:24,759] [Update0] [DEBUG] uart_boot.py:148 data/board_config/j5/boot_config/boot_file/uboot-env.bin start 30.000000 end 30.000000
[2023-07-18 15:36:24,759] [Update0] [INFO] uart_boot.py:149 start load data/board_config/j5/boot_config/boot_file/uboot-env.bin
[2023-07-18 15:36:29,014] [Update0] [INFO] xmodem.py:61 xmodem transmit use CRC
[2023-07-18 15:36:29,094] [Update0] [INFO] uart_boot.py:167 load success
[2023-07-18 15:36:29,097] [Update0] [INFO] core.py:92 [com] xyzModem - CRC mode, 0(SOH)/4(STX)/0(CAN) packets, 1 retries
[2023-07-18 15:36:29,097] [Update0] [DEBUG] core.py:175 try entry linux shell
[2023-07-18 15:36:30,107] [Update0] [INFO] core.py:92 [com] Loaded 4096 bytes
[2023-07-18 15:36:30,107] [Update0] [INFO] core.py:92 [com] [BL31:1970:1:1:0:1:0:779339](0) NOTICE:  BL31: v2.1(debug):j5-fiq-test-413-g5b2a6e6fd
[2023-07-18 15:36:30,108] [Update0] [INFO] core.py:92 [com] [BL31:1970:1:1:0:1:0:780393](0) NOTICE:  BL31: Built : 13:41:43, Jul 25 2022
[2023-07-18 15:36:30,108] [Update0] [INFO] core.py:92 [com] [BL31:1970:1:1:0:1:0:781342](0) INFO:    GICv3 without legacy support detected. ARM GICv3 driver initialized in EL3
[2023-07-18 15:36:30,108] [Update0] [INFO] core.py:92 [com] [BL31:1970:1:1:0:1:0:782809](0) INFO:    GICv3 GICTNS support enable.
[2023-07-18 15:36:30,109] [Update0] [INFO] core.py:92 [com] [BL31:1970:1:1:0:1:0:783713](0) INFO:    tee_fw_fusa_init: tee fw stl inited, module id 5!
[2023-07-18 15:36:30,109] [Update0] [INFO] core.py:92 [com] [BL31:1970:1:1:0:1:0:784866](0) INFO:    tee_fw_fusa_init: tee fw stl inited, module id 2!
[2023-07-18 15:36:30,109] [Update0] [INFO] core.py:92 [com] [BL31:1970:1:1:0:1:0:785992](0) INFO:    tee_fw_fusa_init: tee fw stl inited, module id 3!
[2023-07-18 15:36:30,113] [Update0] [INFO] core.py:92 [com] [BL31:1970:1:1:0:1:0:787117](0) INFO:    tee_fw_fusa_init: tee fw stl inited, module id 4!
[2023-07-18 15:36:30,114] [Update0] [INFO] core.py:92 [com] [BL31:1970:1:1:0:1:0:788226](0) NOTICE:  tee_sectrl_fusa_setup_ops: set sectrl fusa ops
[2023-07-18 15:36:30,114] [Update0] [INFO] core.py:92 [com] [BL31:1970:1:1:0:1:0:789306](0) INFO:    tee_sectrl_fusa_scramble_check: tee sectrl stl scramble check pass!
[2023-07-18 15:36:30,114] [Update0] [INFO] core.py:92 [com] [BL31:1970:1:1:0:1:0:790635](0) INFO:    tee_sectrl_fusa_init: tee sectrl stl inited
[2023-07-18 15:36:30,114] [Update0] [INFO] core.py:92 [com] [BL31:1970:1:1:0:1:0:791694](0) INFO:    BL31: Initialising Exception Handling Framework
[2023-07-18 15:36:30,114] [Update0] [INFO] core.py:92 [com] [BL31:1970:1:1:0:1:0:792781](0) INFO:    BL31: Initializing runtime services
[2023-07-18 15:36:30,114] [Update0] [INFO] core.py:92 [com] [BL31:1970:1:1:0:1:0:793775](0) INFO:    hobotd malloc pool setup at 0x80270000, size:0x200000
[2023-07-18 15:36:30,114] [Update0] [INFO] core.py:92 [com] [BL31:1970:1:1:0:1:0:794932](0) INFO:    hobotd sram  mempool setup at 0x20018000, size:0x2000
[2023-07-18 15:36:30,114] [Update0] [INFO] core.py:92 [com] pdu_get_version version 0x8965
[2023-07-18 15:36:30,114] [Update0] [INFO] core.py:92 [com] spacc->config.num_sec_ctx: 0
[2023-07-18 15:36:30,117] [Update0] [INFO] core.py:92 [com] SPACC ID: (00008965)
[2023-07-18 15:36:30,117] [Update0] [INFO] core.py:92 [com]    MAJOR      : 6
[2023-07-18 15:36:30,117] [Update0] [INFO] core.py:92 [com]    MINOR      : 5
[2023-07-18 15:36:30,117] [Update0] [INFO] core.py:92 [com]    QOS        : 1
[2023-07-18 15:36:30,117] [Update0] [INFO] core.py:92 [com]    IVIMPORT   : 1
[2023-07-18 15:36:30,117] [Update0] [INFO] core.py:92 [com]    TYPE       : 0 (SPACC)
[2023-07-18 15:36:30,117] [Update0] [INFO] core.py:92 [com]    AUX        : 1
[2023-07-18 15:36:30,117] [Update0] [INFO] core.py:92 [com]    IDX        : 0 
[2023-07-18 15:36:30,117] [Update0] [INFO] core.py:92 [com]    PARTIAL    : 1
[2023-07-18 15:36:30,117] [Update0] [INFO] core.py:92 [com]    PROJECT    : 0
[2023-07-18 15:36:30,117] [Update0] [INFO] core.py:92 [com] SPACC CFG: (17721010)
[2023-07-18 15:36:30,117] [Update0] [INFO] core.py:92 [com]    CTX CNT    : 16
[2023-07-18 15:36:30,118] [Update0] [INFO] core.py:92 [com]    RC4 CNT    : 16
[2023-07-18 15:36:30,118] [Update0] [INFO] core.py:92 [com]    VSPACC CNT : 2
[2023-07-18 15:36:30,118] [Update0] [INFO] core.py:92 [com]    CIPH SZ    :    HASH SZ    :    DMA TYPE   : 1 (Scattergather)
[2023-07-18 15:36:30,121] [Update0] [INFO] core.py:92 [com]    MAX PROCLEN: 1048575 bytes
[2023-07-18 15:36:30,121] [Update0] [INFO] core.py:92 [com]    FIFO CONFIG :
[2023-07-18 15:36:30,121] [Update0] [INFO] core.py:92 [com]       CMD0 DEPTH: 8
[2023-07-18 15:36:30,121] [Update0] [INFO] core.py:92 [com]       CMD1 DEPTH: 8
[2023-07-18 15:36:30,121] [Update0] [INFO] core.py:92 [com]       CMD2 DEPTH: 32
[2023-07-18 15:36:30,121] [Update0] [INFO] core.py:92 [com]       STAT DEPTH: 32
[2023-07-18 15:36:30,121] [Update0] [INFO] core.py:92 [com] [BL31:1970:1:1:0:1:0:803357](0) INFO:    Synopsys, Inc. Public Key Accelerator
[2023-07-18 15:36:30,121] [Update0] [INFO] core.py:92 [com] [BL31:1970:1:1:0:1:0:804319](0) INFO:    supports 4096-bit RSA, 1024-bit ECC with 128-bit ALU
[2023-07-18 15:36:30,121] [Update0] [INFO] core.py:92 [com] [BL31:1970:1:1:0:1:0:805469](0) INFO:    firmware RAM: 0 words, ROM: 4096 words
[2023-07-18 15:36:30,122] [Update0] [INFO] core.py:92 [com] [BL31:1970:1:1:0:1:0:806460](0) NOTICE:  EPN-200a Random Number Generator (stepping: 0)
[2023-07-18 15:36:30,126] [Update0] [INFO] core.py:92 [com] [BL31:1970:1:1:0:1:0:807532](0) NOTICE:  Supports 256-bit output mode
[2023-07-18 15:36:30,126] [Update0] [INFO] core.py:92 [com] [BL31:1970:1:1:0:1:0:808391](0) NOTICE:  Supports true random reseed function
[2023-07-18 15:36:30,127] [Update0] [INFO] core.py:92 [com] [BL31:1970:1:1:0:1:0:809361](0) INFO:    BL31: Preparing for EL3 exit to normal world
[2023-07-18 15:36:30,127] [Update0] [INFO] core.py:92 [com] [BL31:1970:1:1:0:1:0:810408](0) INFO:    Entry point address = 0x88000000
[2023-07-18 15:36:30,127] [Update0] [INFO] core.py:92 [com] [BL31:1970:1:1:0:1:0:811316](0) INFO:    SPSR = 0x3c9
[2023-07-18 15:36:30,127] [Update0] [INFO] core.py:92 [com] [BL31:1970:1:1:0:1:0:812397](1) INFO:    bist: j5_bist_paral_func
[2023-07-18 15:36:30,127] [Update0] [INFO] core.py:92 [com] U-Boot 2018.09 (Jul 18 2023 - 11:30:47 +0800) for hobot_j5
[2023-07-18 15:36:30,128] [Update0] [INFO] core.py:92 [com] DRAM:  8 GiB
[2023-07-18 15:36:30,128] [Update0] [INFO] core.py:92 [com] Flash: ## Unknown flash on Bank 1 - Size = 0x00000000 = 0 MB
[2023-07-18 15:36:30,128] [Update0] [INFO] core.py:92 [com] 0 Bytes
[2023-07-18 15:36:30,128] [Update0] [INFO] core.py:92 [com] MMC:   sdhc@0x48030000: 0, sdhc@0x48040000: 1
[2023-07-18 15:36:30,128] [Update0] [INFO] core.py:92 [com] Loading Environment from NVRAM... OK
[2023-07-18 15:36:30,128] [Update0] [INFO] core.py:92 [com] In:    uart@43B90000
[2023-07-18 15:36:30,128] [Update0] [INFO] core.py:92 [com] Out:   uart@43B90000
[2023-07-18 15:36:30,128] [Update0] [INFO] core.py:92 [com] Err:   uart@43B90000
[2023-07-18 15:36:30,128] [Update0] [INFO] core.py:92 [com] Net:   eqos_probe start
[2023-07-18 15:36:30,128] [Update0] [INFO] core.py:92 [com] Warning: ethernet@59110000 (eth0) using random MAC address - da:9b:cf:79:e5:b0
[2023-07-18 15:36:30,128] [Update0] [INFO] core.py:92 [com] eth0: ethernet@59110000eqos_probe start
[2023-07-18 15:36:30,129] [Update0] [INFO] core.py:92 [com] Warning: ethernet@59120000 (eth1) using random MAC address - 3e:9c:8c:3c:1a:24
[2023-07-18 15:36:30,129] [Update0] [INFO] core.py:92 [com] , eth1: ethernet@59120000
[2023-07-18 15:36:30,129] [Update0] [INFO] core.py:92 [com] SF: Detected mt35xu512g with page size 256 Bytes, erase size 32 KiB, total 64 MiB
[2023-07-18 15:36:30,129] [Update0] [INFO] core.py:92 [com] Could not find a valid device for spi6.0
[2023-07-18 15:36:30,129] [Update0] [INFO] core.py:92 [com] mtd:spi-flash1 has find!.flash_num:1
[2023-07-18 15:36:30,130] [Update0] [INFO] core.py:92 [com] flash:1 BInfo slot: 3 at addr: 00040000, mtd Address:00040200
[2023-07-18 15:36:30,130] [Update0] [INFO] core.py:92 [com] mtdparts magic:ffffffff, mtdparts len:-1
[2023-07-18 15:36:30,130] [Update0] [INFO] core.py:92 [com] info: mtdparts magic:ffffffff is not equal to 544f4248
[2023-07-18 15:36:30,130] [Update0] [INFO] core.py:92 [com] boot_mode: 3
[2023-07-18 15:36:30,130] [Update0] [INFO] core.py:92 [com] ANDROID: Booting slot: a
[2023-07-18 15:36:30,130] [Update0] [INFO] core.py:92 [com] setup_boot_action: boot action 0x5242c309
[2023-07-18 15:36:30,130] [Update0] [INFO] core.py:92 [com] setup_boot_action: enter fastboot!
[2023-07-18 15:36:30,130] [Update0] [INFO] core.py:92 [com] eqos_start rate value = -1
[2023-07-18 15:36:30,130] [Update0] [INFO] core.py:92 [com] phy_addr:7
[2023-07-18 15:36:30,137] [Update0] [INFO] core.py:92 [com] media-mode:copper
[2023-07-18 15:36:30,137] [Update0] [INFO] core.py:92 [com] Phy uid:a5a55a5a
[2023-07-18 15:36:30,137] [Update0] [INFO] core.py:92 [com] Phy speed:1000M
[2023-07-18 15:36:30,137] [Update0] [INFO] core.py:92 [com] Phy duplex:1
[2023-07-18 15:36:30,137] [Update0] [INFO] core.py:92 [com] Set Mac Address:da:9b:cf:79:e5:b0
[2023-07-18 15:36:30,137] [Update0] [INFO] core.py:92 [com] Using ethernet@59110000 device
[2023-07-18 15:36:30,137] [Update0] [INFO] core.py:92 [com] Listening for fastboot command on 192.168.1.10
[2023-07-18 15:36:31,166] [Update0] [INFO] core.py:92 [com] [BL31:1970:1:1:0:1:1:371839](1) INFO:    bist: j5_bist_paral_func done
[2023-07-18 15:36:32,304] [Update0] [DEBUG] core.py:175 try entry linux shell
[2023-07-18 15:36:33,332] [Update0] [INFO] core.py:92 [com] Abort
[2023-07-18 15:36:33,333] [Update0] [INFO] core.py:92 [com] fastboot udp error: -4
[2023-07-18 15:36:33,333] [Update0] [INFO] core.py:92 [com] Hit any key to stop autoboot:  3  0 
[2023-07-18 15:36:33,333] [Update0] [INFO] core.py:92 [com] Hobot# root
[2023-07-18 15:36:33,333] [Update0] [INFO] core.py:92 [com] Unknown command 'root' - try 'help'
[2023-07-18 15:36:33,333] [Update0] [INFO] core.py:92 [com] Hobot# 
[2023-07-18 15:36:33,334] [Update0] [INFO] core.py:92 [com] Unknown command 'root' - try 'help'
[2023-07-18 15:36:33,334] [Update0] [INFO] core.py:92 [com] Hobot# 
[2023-07-18 15:36:34,362] [Update0] [INFO] core.py:92 [com] Unknown command 'root' - try 'help'
[2023-07-18 15:36:34,364] [Update0] [INFO] core.py:92 [com] Hobot# 
[2023-07-18 15:36:34,364] [Update0] [INFO] core.py:92 [com] Unknown command 'root' - try 'help'
[2023-07-18 15:36:34,365] [Update0] [INFO] core.py:92 [com] Hobot# 
[2023-07-18 15:36:34,983] [Update0] [INFO] core.py:92 [com] Unknown command 'root' - try 'help'
[2023-07-18 15:36:34,985] [Update0] [INFO] core.py:92 [com] Hobot# 
[2023-07-18 15:36:34,985] [Update0] [INFO] core.py:92 [com] Unknown command 'root' - try 'help'
[2023-07-18 15:36:34,985] [Update0] [INFO] core.py:92 [com] Hobot# 
[2023-07-18 15:36:35,497] [Update0] [INFO] core.py:92 [com] mmc part
[2023-07-18 15:36:35,498] [Update0] [INFO] core.py:92 [com] ## Unknown partition table type 0
[2023-07-18 15:36:35,498] [Update0] [INFO] core.py:92 [com] Hobot# 
[2023-07-18 15:36:36,009] [Update0] [INFO] core.py:92 [com] printenv serial#
[2023-07-18 15:36:36,010] [Update0] [INFO] core.py:92 [com] ## Error: "serial#" not defined
[2023-07-18 15:36:36,010] [Update0] [INFO] core.py:92 [com] Hobot# 
[2023-07-18 15:36:36,010] [Update0] [DEBUG] core.py:363 printenv serial#

## Error: "serial#" not defined

Hobot# 
[2023-07-18 15:36:36,011] [Update0] [DEBUG] transfer_to_board.py:330 can not detect serial number, use serial mode
[2023-07-18 15:36:36,011] [Update0] [INFO] transfer_to_board.py:73 setenv ipaddr 192.168.1.10 

[2023-07-18 15:36:36,012] [Update0] [INFO] transfer_to_board.py:76 setenv serverip 192.168.1.44 

[2023-07-18 15:36:36,522] [Update0] [INFO] core.py:92 [com] setenv ipaddr 192.168.1.10 
[2023-07-18 15:36:36,525] [Update0] [INFO] core.py:92 [com] Hobot# setenv serverip 192.168.1.44 
[2023-07-18 15:36:36,525] [Update0] [INFO] core.py:92 [com] Hobot# ping 192.168.1.44
[2023-07-18 15:36:36,525] [Update0] [INFO] core.py:92 [com] eqos_start rate value = -1
[2023-07-18 15:36:36,526] [Update0] [INFO] core.py:92 [com] phy_addr:7
[2023-07-18 15:36:36,526] [Update0] [INFO] core.py:92 [com] media-mode:copper
[2023-07-18 15:36:36,526] [Update0] [INFO] core.py:92 [com] Phy uid:a5a55a5a
[2023-07-18 15:36:36,527] [Update0] [INFO] core.py:92 [com] Phy speed:1000M
[2023-07-18 15:36:36,527] [Update0] [INFO] core.py:92 [com] Phy duplex:1
[2023-07-18 15:36:36,527] [Update0] [INFO] core.py:92 [com] Set Mac Address:da:9b:cf:79:e5:b0
[2023-07-18 15:36:36,527] [Update0] [INFO] core.py:92 [com] Using ethernet@59110000 device
[2023-07-18 15:36:36,527] [Update0] [INFO] core.py:92 [com] eqos_send packet 
[2023-07-18 15:36:36,527] [Update0] [INFO] core.py:92 [com] 0xff 0xff 0xff 0xff 0xff 0xff 0xda 0x9b 0xcf 0x79 0xe5 0xb0 0x08 0x06 0x00 
[2023-07-18 15:36:36,528] [Update0] [INFO] core.py:92 [com] 0x01 0x08 0x00 0x06 0x04 0x00 0x01 0xda 0x9b 0xcf 0x79 0xe5 0xb0 0xc0 0xa8 0x01 
[2023-07-18 15:36:36,528] [Update0] [INFO] core.py:92 [com] 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 0xc0 0xa8 0x01 0x2c 
[2023-07-18 15:36:36,528] [Update0] [INFO] core.py:92 [com] eqos_flush_desc end
[2023-07-18 15:36:41,614] [Update0] [INFO] core.py:92 [com] eqos_send packet 
[2023-07-18 15:36:41,614] [Update0] [INFO] core.py:92 [com] 0xff 0xff 0xff 0xff 0xff 0xff 0xda 0x9b 0xcf 0x79 0xe5 0xb0 0x08 0x06 0x00 
[2023-07-18 15:36:41,616] [Update0] [INFO] core.py:92 [com] 0x01 0x08 0x00 0x06 0x04 0x00 0x01 0xda 0x9b 0xcf 0x79 0xe5 0xb0 0xc0 0xa8 0x01 
[2023-07-18 15:36:41,616] [Update0] [INFO] core.py:92 [com] 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 0xc0 0xa8 0x01 0x2c 
[2023-07-18 15:36:41,616] [Update0] [INFO] core.py:92 [com] eqos_flush_desc end
[2023-07-18 15:36:46,231] [Update0] [INFO] core.py:92 [com] eqos_send packet 
[2023-07-18 15:36:46,232] [Update0] [INFO] core.py:92 [com] 0xff 0xff 0xff 0xff 0xff 0xff 0xda 0x9b 0xcf 0x79 0xe5 0xb0 0x08 0x06 0x00 
[2023-07-18 15:36:46,232] [Update0] [INFO] core.py:92 [com] 0x01 0x08 0x00 0x06 0x04 0x00 0x01 0xda 0x9b 0xcf 0x79 0xe5 0xb0 0xc0 0xa8 0x01 
[2023-07-18 15:36:46,232] [Update0] [INFO] core.py:92 [com] 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 0xc0 0xa8 0x01 0x2c 
[2023-07-18 15:36:46,233] [Update0] [INFO] core.py:92 [com] eqos_flush_desc end
[2023-07-18 15:36:51,350] [Update0] [INFO] core.py:92 [com] eqos_send packet 
[2023-07-18 15:36:51,352] [Update0] [INFO] core.py:92 [com] 0xff 0xff 0xff 0xff 0xff 0xff 0xda 0x9b 0xcf 0x79 0xe5 0xb0 0x08 0x06 0x00 
[2023-07-18 15:36:51,352] [Update0] [INFO] core.py:92 [com] 0x01 0x08 0x00 0x06 0x04 0x00 0x01 0xda 0x9b 0xcf 0x79 0xe5 0xb0 0xc0 0xa8 0x01 
[2023-07-18 15:36:51,353] [Update0] [INFO] core.py:92 [com] 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 0xc0 0xa8 0x01 0x2c 
[2023-07-18 15:36:51,353] [Update0] [INFO] core.py:92 [com] eqos_flush_desc end
[2023-07-18 15:36:56,415] [Update0] [INFO] core.py:92 [com] ARP Retry count exceeded; starting again
[2023-07-18 15:36:56,417] [Update0] [INFO] core.py:92 [com] ping failed; host 192.168.1.44 is not alive
[2023-07-18 15:36:56,418] [Update0] [INFO] core.py:92 [com] Hobot# 
[2023-07-18 15:36:56,418] [Update0] [INFO] transfer_to_board.py:84 board net ping is not alive, please check net...
[2023-07-18 15:36:57,942] [Update0] [INFO] core.py:92 [com] ping 192.168.1.44
[2023-07-18 15:36:57,944] [Update0] [INFO] core.py:92 [com] eqos_start rate value = -1
[2023-07-18 15:36:57,944] [Update0] [INFO] core.py:92 [com] phy_addr:7
[2023-07-18 15:36:57,944] [Update0] [INFO] core.py:92 [com] media-mode:copper
[2023-07-18 15:36:57,944] [Update0] [INFO] core.py:92 [com] Phy uid:a5a55a5a
[2023-07-18 15:36:57,944] [Update0] [INFO] core.py:92 [com] Phy speed:1000M
[2023-07-18 15:36:57,944] [Update0] [INFO] core.py:92 [com] Phy duplex:1
[2023-07-18 15:36:57,944] [Update0] [INFO] core.py:92 [com] Set Mac Address:da:9b:cf:79:e5:b0
[2023-07-18 15:36:57,944] [Update0] [INFO] core.py:92 [com] Using ethernet@59110000 device
[2023-07-18 15:36:57,945] [Update0] [INFO] core.py:92 [com] eqos_send packet 
[2023-07-18 15:36:57,945] [Update0] [INFO] core.py:92 [com] 0xff 0xff 0xff 0xff 0xff 0xff 0xda 0x9b 0xcf 0x79 0xe5 0xb0 0x08 0x06 0x00 
[2023-07-18 15:36:57,945] [Update0] [INFO] core.py:92 [com] 0x01 0x08 0x00 0x06 0x04 0x00 0x01 0xda 0x9b 0xcf 0x79 0xe5 0xb0 0xc0 0xa8 0x01 
[2023-07-18 15:36:57,945] [Update0] [INFO] core.py:92 [com] 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 0xc0 0xa8 0x01 0x2c 
[2023-07-18 15:36:57,946] [Update0] [INFO] core.py:92 [com] eqos_flush_desc end
[2023-07-18 15:37:02,568] [Update0] [INFO] core.py:92 [com] eqos_send packet 
[2023-07-18 15:37:02,569] [Update0] [INFO] core.py:92 [com] 0xff 0xff 0xff 0xff 0xff 0xff 0xda 0x9b 0xcf 0x79 0xe5 0xb0 0x08 0x06 0x00 
[2023-07-18 15:37:02,570] [Update0] [INFO] core.py:92 [com] 0x01 0x08 0x00 0x06 0x04 0x00 0x01 0xda 0x9b 0xcf 0x79 0xe5 0xb0 0xc0 0xa8 0x01 
[2023-07-18 15:37:02,570] [Update0] [INFO] core.py:92 [com] 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 0xc0 0xa8 0x01 0x2c 
[2023-07-18 15:37:02,570] [Update0] [INFO] core.py:92 [com] eqos_flush_desc end
[2023-07-18 15:37:07,655] [Update0] [INFO] core.py:92 [com] eqos_send packet 
[2023-07-18 15:37:07,656] [Update0] [INFO] core.py:92 [com] 0xff 0xff 0xff 0xff 0xff 0xff 0xda 0x9b 0xcf 0x79 0xe5 0xb0 0x08 0x06 0x00 
[2023-07-18 15:37:07,656] [Update0] [INFO] core.py:92 [com] 0x01 0x08 0x00 0x06 0x04 0x00 0x01 0xda 0x9b 0xcf 0x79 0xe5 0xb0 0xc0 0xa8 0x01 
[2023-07-18 15:37:07,656] [Update0] [INFO] core.py:92 [com] 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 0xc0 0xa8 0x01 0x2c 
[2023-07-18 15:37:07,656] [Update0] [INFO] core.py:92 [com] eqos_flush_desc end
[2023-07-18 15:37:12,765] [Update0] [INFO] core.py:92 [com] eqos_send packet 
[2023-07-18 15:37:12,766] [Update0] [INFO] core.py:92 [com] 0xff 0xff 0xff 0xff 0xff 0xff 0xda 0x9b 0xcf 0x79 0xe5 0xb0 0x08 0x06 0x00 
[2023-07-18 15:37:12,766] [Update0] [INFO] core.py:92 [com] 0x01 0x08 0x00 0x06 0x04 0x00 0x01 0xda 0x9b 0xcf 0x79 0xe5 0xb0 0xc0 0xa8 0x01 
[2023-07-18 15:37:12,766] [Update0] [INFO] core.py:92 [com] 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 0xc0 0xa8 0x01 0x2c 
[2023-07-18 15:37:12,767] [Update0] [INFO] core.py:92 [com] eqos_flush_desc end
[2023-07-18 15:37:17,866] [Update0] [INFO] core.py:92 [com] ARP Retry count exceeded; starting again
[2023-07-18 15:37:17,867] [Update0] [INFO] core.py:92 [com] ping failed; host 192.168.1.44 is not alive
[2023-07-18 15:37:17,867] [Update0] [INFO] core.py:92 [com] Hobot# 
[2023-07-18 15:37:17,868] [Update0] [INFO] transfer_to_board.py:84 board net ping is not alive, please check net...
[2023-07-18 15:37:19,394] [Update0] [INFO] core.py:92 [com] ping 192.168.1.44
[2023-07-18 15:37:19,395] [Update0] [INFO] core.py:92 [com] eqos_start rate value = -1
[2023-07-18 15:37:19,395] [Update0] [INFO] core.py:92 [com] phy_addr:7
[2023-07-18 15:37:19,395] [Update0] [INFO] core.py:92 [com] media-mode:copper
[2023-07-18 15:37:19,395] [Update0] [INFO] core.py:92 [com] Phy uid:a5a55a5a
[2023-07-18 15:37:19,395] [Update0] [INFO] core.py:92 [com] Phy speed:1000M
[2023-07-18 15:37:19,395] [Update0] [INFO] core.py:92 [com] Phy duplex:1
[2023-07-18 15:37:19,396] [Update0] [INFO] core.py:92 [com] Set Mac Address:da:9b:cf:79:e5:b0
[2023-07-18 15:37:19,396] [Update0] [INFO] core.py:92 [com] Using ethernet@59110000 device
[2023-07-18 15:37:19,396] [Update0] [INFO] core.py:92 [com] eqos_send packet 
[2023-07-18 15:37:19,396] [Update0] [INFO] core.py:92 [com] 0xff 0xff 0xff 0xff 0xff 0xff 0xda 0x9b 0xcf 0x79 0xe5 0xb0 0x08 0x06 0x00 
[2023-07-18 15:37:19,397] [Update0] [INFO] core.py:92 [com] 0x01 0x08 0x00 0x06 0x04 0x00 0x01 0xda 0x9b 0xcf 0x79 0xe5 0xb0 0xc0 0xa8 0x01 
[2023-07-18 15:37:19,397] [Update0] [INFO] core.py:92 [com] 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 0xc0 0xa8 0x01 0x2c 
[2023-07-18 15:37:19,397] [Update0] [INFO] core.py:92 [com] eqos_flush_desc end
[2023-07-18 15:37:24,023] [Update0] [INFO] core.py:92 [com] eqos_send packet 
[2023-07-18 15:37:24,024] [Update0] [INFO] core.py:92 [com] 0xff 0xff 0xff 0xff 0xff 0xff 0xda 0x9b 0xcf 0x79 0xe5 0xb0 0x08 0x06 0x00 
[2023-07-18 15:37:24,024] [Update0] [INFO] core.py:92 [com] 0x01 0x08 0x00 0x06 0x04 0x00 0x01 0xda 0x9b 0xcf 0x79 0xe5 0xb0 0xc0 0xa8 0x01 
[2023-07-18 15:37:24,024] [Update0] [INFO] core.py:92 [com] 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 0xc0 0xa8 0x01 0x2c 
[2023-07-18 15:37:24,025] [Update0] [INFO] core.py:92 [com] eqos_flush_desc end
[2023-07-18 15:37:26,577] [Update0] [INFO] core.py:92 [com] eqos_recv packet
[2023-07-18 15:37:26,579] [Update0] [INFO] core.py:92 [com] 0x08 0x46 0x0b 0x88 0x00 0x00 0x00 0x00 0x08 0x46 0x0b 0x88 0x00 0x00 0x00 
[2023-07-18 15:37:26,579] [Update0] [INFO] core.py:92 [com] 0x00 0x20 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 0x00 0x00 0x00 
[2023-07-18 15:37:26,580] [Update0] [INFO] core.py:92 [com] 0x00 0x5e 0x73 0x65 0x72 0x76 0x65 0x72 0x69 0x70 0x24 0x00 0x00 0x00 0x00 0x00 
[2023-07-18 15:37:26,580] [Update0] [INFO] core.py:92 [com] 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xd1 0x20 0x00 0x00 0x00 0x00 0x00 
[2023-07-18 15:37:26,580] [Update0] [INFO] core.py:92 [com] 0x00 0x69 0x00 0x72 0x76 0x65 0x72 0x69 0x70 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
[2023-07-18 15:37:26,580] [Update0] [INFO] core.py:92 [com] 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xb1 0x20 0x00 0x00 0x00 0x00 0x00 
[2023-07-18 15:37:26,581] [Update0] [INFO] core.py:92 [com] 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
[2023-07-18 15:37:26,581] [Update0] [INFO] core.py:92 [com] 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
[2023-07-18 15:37:26,581] [Update0] [INFO] core.py:92 [com] 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
[2023-07-18 15:37:26,583] [Update0] [INFO] core.py:92 [com] 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
[2023-07-18 15:37:26,583] [Update0] [INFO] core.py:92 [com] 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
[2023-07-18 15:37:26,583] [Update0] [INFO] core.py:92 [com] 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
[2023-07-18 15:37:26,583] [Update0] [INFO] core.py:92 [com] 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
[2023-07-18 15:37:26,583] [Update0] [INFO] core.py:92 [com] 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
[2023-07-18 15:37:26,584] [Update0] [INFO] core.py:92 [com] 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
[2023-07-18 15:37:26,584] [Update0] [INFO] core.py:92 [com] 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
[2023-07-18 15:37:29,154] [Update0] [INFO] core.py:92 [com] eqos_send packet 
[2023-07-18 15:37:29,155] [Update0] [INFO] core.py:92 [com] 0xff 0xff 0xff 0xff 0xff 0xff 0xda 0x9b 0xcf 0x79 0xe5 0xb0 0x08 0x06 0x00 
[2023-07-18 15:37:29,155] [Update0] [INFO] core.py:92 [com] 0x01 0x08 0x00 0x06 0x04 0x00 0x01 0xda 0x9b 0xcf 0x79 0xe5 0xb0 0xc0 0xa8 0x01 
[2023-07-18 15:37:29,155] [Update0] [INFO] core.py:92 [com] 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 0xc0 0xa8 0x01 0x2c 
[2023-07-18 15:37:29,156] [Update0] [INFO] core.py:92 [com] eqos_flush_desc end
[2023-07-18 15:37:34,273] [Update0] [INFO] core.py:92 [com] eqos_send packet 
[2023-07-18 15:37:34,274] [Update0] [INFO] core.py:92 [com] 0xff 0xff 0xff 0xff 0xff 0xff 0xda 0x9b 0xcf 0x79 0xe5 0xb0 0x08 0x06 0x00 
[2023-07-18 15:37:34,274] [Update0] [INFO] core.py:92 [com] 0x01 0x08 0x00 0x06 0x04 0x00 0x01 0xda 0x9b 0xcf 0x79 0xe5 0xb0 0xc0 0xa8 0x01 
[2023-07-18 15:37:34,275] [Update0] [INFO] core.py:92 [com] 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 0xc0 0xa8 0x01 0x2c 
[2023-07-18 15:37:34,275] [Update0] [INFO] core.py:92 [com] eqos_flush_desc end
[2023-07-18 15:37:37,862] [Update0] [INFO] core.py:92 [com] [M:1970:01:01:00:02:00:001117] E: 
[2023-07-18 15:37:37,863] [Update0] [INFO] core.py:92 [com] [M:1970:01:01:00:02:00:001506] E: 
[2023-07-18 15:37:37,864] [Update0] [INFO] core.py:92 [com] [M:1970:01:01:00:02:00:001897] E: 
[2023-07-18 15:37:37,864] [Update0] [INFO] core.py:92 [com] [M:1970:01:01:00:02:00:002287] E: 
[2023-07-18 15:37:37,864] [Update0] [INFO] core.py:92 [com] [M:1970:01:01:00:02:00:002678] E: error  !!!!!!!!!!!!!!!
[2023-07-18 15:37:37,864] [Update0] [INFO] core.py:92 [com] [M:1970:01:01:00:02:00:003307] E: timeout 120s,fchm use first setting
[2023-07-18 15:37:37,865] [Update0] [INFO] core.py:92 [com] [M:1970:01:01:00:02:00:004079] E: please run : devmem  0x2001bf28 32 0xdeadbeef
[2023-07-18 15:37:37,865] [Update0] [INFO] core.py:92 [com] [M:1970:01:01:00:02:00:004960] E: 
[2023-07-18 15:37:37,865] [Update0] [INFO] core.py:92 [com] [M:1970:01:01:00:02:00:005348] E: 
[2023-07-18 15:37:39,379] [Update0] [INFO] core.py:92 [com] ARP Retry count exceeded; starting again
[2023-07-18 15:37:39,379] [Update0] [INFO] core.py:92 [com] ping failed; host 192.168.1.44 is not alive
[2023-07-18 15:37:39,380] [Update0] [INFO] core.py:92 [com] Hobot# 
[2023-07-18 15:37:39,380] [Update0] [INFO] transfer_to_board.py:84 board net ping is not alive, please check net...
[2023-07-18 15:37:40,390] [Update0] [ERROR] transfer_to_board.py:91 The network of the board is blocked!
[2023-07-18 15:37:40,391] [Update0] [ERROR] transfer_to_board.py:334 network test failed!
[2023-07-18 15:37:40,515] [Update0] [ERROR] hbupdate-gui.py:149 update fail: